Need help, advice or a quote? Call us

01934 253600

Unvented Hot Water Cylinder Installation

SKU
EDDINSTALL003

A professional installation service for your Unvented Hot Water Cylinder is available across the UK from qualified installers.

£763.20 £636.00

Unvented Hot Water Cylinder Installation

A professional installation service for your Unvented Hot Water Cylinder is available across the UK from qualified installers.

Please note, the price listed is a guaranteed fixed price, assuming that all of the following criteria are fulfilled:

CRITERIA

  • Access to hot and cold water services at installation site. 

The cold main pipe must be 22mm diameter. If you are replacing a previous boiler, these services will almost certainly already be there, ,but if you are in any doubt please let us know and we will be happy to help. 

  • Heating Flow and Return pipes at point of installation. (Indirect only). 

If you have an existing boiler, these pipes will almost certainly already be in position. Again, if you are in any doubt, or are installing in a new location, please give us a call and we can advise the best solution. 

  • Suitable electrical supply for immersion heater elements 

Again, if the installation is a replacement, this will likely already be in place. however, please do double check that the electrical rating of the new cylinder is the same as the previous one, as a higher requirement may require a larger cable to be routed from the consumer unit. Check the documentation or ask us if you are in any doubt.

  • Adequate room to install.

It may sound obvious, but it is not unknown for there to be inadequate room to put the new cylinder! Please check the height and diameter will fit comfortably (there is usually an additional amount of space required around the boiler. This is listed in the installation manual but if you cannot find it let us know.

  • Access to Outside Wall

This is to accomodate a pressure relief discharge. Again, for a replacement situation, you will already have this but it is worth checking.

It is also necessary to select your postcode area to allow for any geographical supplements.