Glow-Worm 20097340 Siphon Assembly - Genuine Glow-Worm Product
- SKU
- EDDGLOWWORM116
Our Expert's Opinion
"A manufacturer approved siphon assembly that protects internal components by maintaining proper condensate flow and preventing odours or gases from entering the boiler."Glow-Worm 20097340 Siphon Assembly - Genuine Glow-Worm Product
As a genuine Glow‑Worm spare part, the 20097340 siphon assembly is manufactured to original equipment specifications for sealing integrity, material resistance, and reliable long‑term performance under thermal cycling and repeated condensate flow. Condensate handling is critical in condensing boilers because stale, acidic water — formed during combustion — can damage internal components or lead to blockages if not removed properly. The siphon assembly helps maintain an effective water trap that prevents unwanted air and gas ingress while allowing the condensate to flow freely toward the external drain. Its design also helps reduce the risk of dry traps or siphon loss due to evaporation, which can lead to nuisance boiler fault codes if gases are sensed by internal sensors.
Over time, siphon assemblies can become blocked by debris, scale, or sludge carried with the condensate, or they may lose their water seal due to evaporation or improper installation fall. A malfunctioning siphon can result in gurgling noises, boiler lockouts (e.g., F28/F29 fault codes), foul smells, or condensate backing up into the boiler, all of which compromise comfort and reliability. Replacing a worn or blocked siphon with this OEM component restores proper sealing and condensate disposal, helping maintain efficient, safe boiler operation. Because correct installation of condensate components is essential for system compliance and safety, fitting should be carried out by a qualified heating engineer, who will also ensure adequate fall and drainage to prevent freeze‑ups or blockages.
Glow-Worm provide a 1 year warranty on all genuine spare parts. Electrical Deals Direct now sells a wide range of spare parts. If you cannot see the item you require on our website, please call 01934 253600 or email [email protected] for more information.
This is a genuine Glow-Worm spare part supplied directly from the manufacturer. We ensure full compatibility, reliable performance and the highest quality standards.
| MPN | 20097340 |
|---|---|
| Product Code | EDDGLOWWORM116 |
| Part Origin | Genuine |
Delivery Information -
Standard delivery for all orders over £150 ex-VAT are free of charge.
If we can speed this up, we will, but you can also select Express Delivery when you check out and get your purchase more quickly (usually the next working day, subject to a 1pm cut-off): there is an extra charge for this ranging from £5 to £29.99 depending on the products you are buying.
We partner with several of the best UK carriers (such as TNT, Royal Mail, DPD etc) depending on the type of product and the warehouse it is coming from, and also with some pallet companies for larger items. All of these operate during normal Monday – Friday working hours, and we expect all deliveries to arrive in 5 days. For more details checkout this page.
Gledhill Cylinders – Delivery Charge -
For all Gledhill Cylinders, a flat delivery charge of £27.50 (ex-VAT) applies, regardless of order value or delivery method. This will be added automatically at checkout.
Returns Information -
Having to return a product because it doesn’t fit, or is not what you wanted, is really annoying! To try and make sure this isn’t necessary we have lots of helpful advice on our site, and you should feel free to call our experts on the number above to check if you are in any doubt at all – we’re always happy to help.
But if you do, don’t worry, just contact us and we’ll get it sorted (note that for trade customers there may be a restocking fee). If you need it, we can usually arrange the carrier to pick it up.
For full details of our policy, check out the small print here.
Glow-Worm 20097340 Siphon Assembly - Genuine Glow-Worm Product
As a genuine Glow‑Worm spare part, the 20097340 siphon assembly is manufactured to original equipment specifications for sealing integrity, material resistance, and reliable long‑term performance under thermal cycling and repeated condensate flow. Condensate handling is critical in condensing boilers because stale, acidic water — formed during combustion — can damage internal components or lead to blockages if not removed properly. The siphon assembly helps maintain an effective water trap that prevents unwanted air and gas ingress while allowing the condensate to flow freely toward the external drain. Its design also helps reduce the risk of dry traps or siphon loss due to evaporation, which can lead to nuisance boiler fault codes if gases are sensed by internal sensors.
Over time, siphon assemblies can become blocked by debris, scale, or sludge carried with the condensate, or they may lose their water seal due to evaporation or improper installation fall. A malfunctioning siphon can result in gurgling noises, boiler lockouts (e.g., F28/F29 fault codes), foul smells, or condensate backing up into the boiler, all of which compromise comfort and reliability. Replacing a worn or blocked siphon with this OEM component restores proper sealing and condensate disposal, helping maintain efficient, safe boiler operation. Because correct installation of condensate components is essential for system compliance and safety, fitting should be carried out by a qualified heating engineer, who will also ensure adequate fall and drainage to prevent freeze‑ups or blockages.
Glow-Worm provide a 1 year warranty on all genuine spare parts. Electrical Deals Direct now sells a wide range of spare parts. If you cannot see the item you require on our website, please call 01934 253600 or email [email protected] for more information.
This is a genuine Glow-Worm spare part supplied directly from the manufacturer. We ensure full compatibility, reliable performance and the highest quality standards.
| MPN | 20097340 |
|---|---|
| Product Code | EDDGLOWWORM116 |
| Part Origin | Genuine |
Delivery Information -
Standard delivery for all orders over £150 ex-VAT are free of charge.
If we can speed this up, we will, but you can also select Express Delivery when you check out and get your purchase more quickly (usually the next working day, subject to a 1pm cut-off): there is an extra charge for this ranging from £5 to £29.99 depending on the products you are buying.
We partner with several of the best UK carriers (such as TNT, Royal Mail, DPD etc) depending on the type of product and the warehouse it is coming from, and also with some pallet companies for larger items. All of these operate during normal Monday – Friday working hours, and we expect all deliveries to arrive in 5 days. For more details checkout this page.
Gledhill Cylinders – Delivery Charge -
For all Gledhill Cylinders, a flat delivery charge of £27.50 (ex-VAT) applies, regardless of order value or delivery method. This will be added automatically at checkout.
Returns Information -
Having to return a product because it doesn’t fit, or is not what you wanted, is really annoying! To try and make sure this isn’t necessary we have lots of helpful advice on our site, and you should feel free to call our experts on the number above to check if you are in any doubt at all – we’re always happy to help.
But if you do, don’t worry, just contact us and we’ll get it sorted (note that for trade customers there may be a restocking fee). If you need it, we can usually arrange the carrier to pick it up.
For full details of our policy, check out the small print here.
- Price:
- Actual Price:
Are you sure you would like to remove this item from the shopping cart?
This item is a part of the approved quote. Removing it will remove all quote items from the cart.