Heatrae Sadia Element Plate 95606921 | Genuine Replacement Spare Part
- SKU
- EDDBAXISPARE22
Need something else?
Can’t find what you’re looking for? Click here to use our spare part finder.Genuine Heatrae Sadia 95606921 Element Plate Assembly 3kW
The 95606921 is the genuine Heatrae Sadia 3kW element plate assembly fitted to 10 and 15 litre electric water heaters built from 2001 onwards, across the Multipoint, Heatstore and Aqualine ranges. It is the post-2001 assembly, and it is not interchangeable with the plate used on earlier units.
What it does
On a small electric water heater the element and its mounting plate are supplied as one assembly. The plate seals the opening in the vessel and carries the heating element, its terminals and the thermostat pocket. Because the element is not separable from the plate on these units, a failed element means replacing the assembly rather than the element alone.
Symptoms of a failed element plate
- No hot water at all, with the element reading open circuit
- Water heating far more slowly than it should, or never reaching temperature
- Repeated tripping of the RCD or the thermal cut-out
- Weeping or corrosion around the plate seal
- Heavy scaling on the element in a hard water area
Compatible models
Fits Heatrae Sadia Multipoint 10 and Multipoint 10 XV; Heatstore 10/15 HS and 10/15 XV; Heatstore HS30, HS50U, HSU 30 and HSU 50; and the Aqualine HSM 10 and HSM 15 and AL073, AL103, AL153 and AL154.5 water heaters. This is the later plate - suppliers date it variously from 1999 or 2001, so check the part number on your existing plate rather than working from the year. Note this is a WATER HEATER part: it does not fit Amptec or Electromax electric boilers, which use a different element arrangement.
Installation
Isolate the appliance electrically and drain the vessel before removing the plate. Fit a new gasket with the assembly - the old one will not reseal. Where the appliance is an unvented water heater, work on the pressure system requires a G3 qualified operative under Building Regulations Part G. Electrical connection should be made by a qualified electrician.
Heatrae Sadia is part of Baxi Heating UK and this part is supplied through the Baxi genuine parts range, with a 1 year manufacturer warranty. Electrical Deals Direct stocks a wide range of spare parts - if you cannot see the item you need, call 01934 253600 or email [email protected].
| MPN | 95606921 |
|---|---|
| Product Code | EDDBAXISPARE22 |
| Compatible With: Product Code (SKU) | Heatrae Sadia Multipoint 10 and 10 XV (later units); Heatstore 10/15 HS and 10/15 XV; Heatstore HS30, HS50U, HSU 30 and HSU 50; Aqualine HSM 10, HSM 15, AL073, AL103, AL153 and AL154.5 |
| Part Origin | Genuine |
| Part or Accessory? | Part |
| Brand | Heatrae Sadia |
| Empty Weight (kG) | 5 |
| Full Weight (kG) | 1 |
Delivery Information -
Standard delivery for all orders over £150 ex-VAT are free of charge.
If we can speed this up, we will, but you can also select Express Delivery when you check out and get your purchase more quickly (usually the next working day, subject to a 1pm cut-off): there is an extra charge for this ranging from £5 to £29.99 depending on the products you are buying.
We partner with several of the best UK carriers (such as TNT, Royal Mail, DPD etc) depending on the type of product and the warehouse it is coming from, and also with some pallet companies for larger items. All of these operate during normal Monday – Friday working hours, and we expect all deliveries to arrive in 5 days. For more details checkout this page.
Gledhill Cylinders – Delivery Charge -
For all Gledhill Cylinders, a flat delivery charge of £33.00 (ex-VAT) applies, regardless of order value or delivery method. This will be added automatically at checkout.
Returns Information -
Having to return a product because it doesn’t fit, or is not what you wanted, is really annoying! To try and make sure this isn’t necessary we have lots of helpful advice on our site, and you should feel free to call our experts on the number above to check if you are in any doubt at all – we’re always happy to help.
But if you do, don’t worry, just contact us and we’ll get it sorted (note that for trade customers there may be a restocking fee). If you need it, we can usually arrange the carrier to pick it up.
For full details of our policy, check out the small print here.
Genuine Heatrae Sadia 95606921 Element Plate Assembly 3kW
The 95606921 is the genuine Heatrae Sadia 3kW element plate assembly fitted to 10 and 15 litre electric water heaters built from 2001 onwards, across the Multipoint, Heatstore and Aqualine ranges. It is the post-2001 assembly, and it is not interchangeable with the plate used on earlier units.
What it does
On a small electric water heater the element and its mounting plate are supplied as one assembly. The plate seals the opening in the vessel and carries the heating element, its terminals and the thermostat pocket. Because the element is not separable from the plate on these units, a failed element means replacing the assembly rather than the element alone.
Symptoms of a failed element plate
- No hot water at all, with the element reading open circuit
- Water heating far more slowly than it should, or never reaching temperature
- Repeated tripping of the RCD or the thermal cut-out
- Weeping or corrosion around the plate seal
- Heavy scaling on the element in a hard water area
Compatible models
Fits Heatrae Sadia Multipoint 10 and Multipoint 10 XV; Heatstore 10/15 HS and 10/15 XV; Heatstore HS30, HS50U, HSU 30 and HSU 50; and the Aqualine HSM 10 and HSM 15 and AL073, AL103, AL153 and AL154.5 water heaters. This is the later plate - suppliers date it variously from 1999 or 2001, so check the part number on your existing plate rather than working from the year. Note this is a WATER HEATER part: it does not fit Amptec or Electromax electric boilers, which use a different element arrangement.
Installation
Isolate the appliance electrically and drain the vessel before removing the plate. Fit a new gasket with the assembly - the old one will not reseal. Where the appliance is an unvented water heater, work on the pressure system requires a G3 qualified operative under Building Regulations Part G. Electrical connection should be made by a qualified electrician.
Heatrae Sadia is part of Baxi Heating UK and this part is supplied through the Baxi genuine parts range, with a 1 year manufacturer warranty. Electrical Deals Direct stocks a wide range of spare parts - if you cannot see the item you need, call 01934 253600 or email [email protected].
| MPN | 95606921 |
|---|---|
| Product Code | EDDBAXISPARE22 |
| Compatible With: Product Code (SKU) | Heatrae Sadia Multipoint 10 and 10 XV (later units); Heatstore 10/15 HS and 10/15 XV; Heatstore HS30, HS50U, HSU 30 and HSU 50; Aqualine HSM 10, HSM 15, AL073, AL103, AL153 and AL154.5 |
| Part Origin | Genuine |
| Part or Accessory? | Part |
| Brand | Heatrae Sadia |
| Empty Weight (kG) | 5 |
| Full Weight (kG) | 1 |
Delivery Information -
Standard delivery for all orders over £150 ex-VAT are free of charge.
If we can speed this up, we will, but you can also select Express Delivery when you check out and get your purchase more quickly (usually the next working day, subject to a 1pm cut-off): there is an extra charge for this ranging from £5 to £29.99 depending on the products you are buying.
We partner with several of the best UK carriers (such as TNT, Royal Mail, DPD etc) depending on the type of product and the warehouse it is coming from, and also with some pallet companies for larger items. All of these operate during normal Monday – Friday working hours, and we expect all deliveries to arrive in 5 days. For more details checkout this page.
Gledhill Cylinders – Delivery Charge -
For all Gledhill Cylinders, a flat delivery charge of £33.00 (ex-VAT) applies, regardless of order value or delivery method. This will be added automatically at checkout.
Returns Information -
Having to return a product because it doesn’t fit, or is not what you wanted, is really annoying! To try and make sure this isn’t necessary we have lots of helpful advice on our site, and you should feel free to call our experts on the number above to check if you are in any doubt at all – we’re always happy to help.
But if you do, don’t worry, just contact us and we’ll get it sorted (note that for trade customers there may be a restocking fee). If you need it, we can usually arrange the carrier to pick it up.
For full details of our policy, check out the small print here.
