Heatrae Sadia Immersion Heater Gasket 95611025 | Genuine Replacement Spare Part
- SKU
- EDDBAXISPARE32
Need something else?
Can’t find what you’re looking for? Click here to use our spare part finder.Genuine Heatrae Sadia 95611025 Immersion Heater Gasket
The 95611025 is the genuine Heatrae Sadia sealing gasket that sits between an immersion heater flange and the boss on the cylinder or calorifier it screws into.
What it does
An immersion element enters the vessel through a threaded or bolted boss, and the gasket is the only thing making that joint watertight under working pressure. It is a consumable: once compressed and heat-cycled it takes a set, so it will not reseal reliably if it is reused after the element has been withdrawn.
When to fit one
- Every time an immersion heater or element is removed, for any reason
- When replacing a failed element - fit the new gasket with it, never the old one
- Where the existing joint is weeping or showing scale tracks around the flange
- After any inspection that involves breaking the element joint
Compatible models
Used across Heatrae Sadia Megaflo and Flexistor cylinders and on Commercial Calorifiers and Industrial Cylinders in direct, indirect and solar configurations. Immersion boss sizes vary across the Heatrae Sadia range, so confirm the gasket part number against the element you are fitting rather than the cylinder model alone.
Installation
Where the vessel is an unvented cylinder, work on it requires a G3 qualified operative under Building Regulations Part G. Drain to below the element before breaking the joint, fit the gasket dry unless the element instructions say otherwise, and tighten evenly to the manufacturer's figure.
Heatrae Sadia is part of Baxi Heating UK and this part is supplied through the Baxi genuine parts range, with a 1 year manufacturer warranty. Electrical Deals Direct stocks a wide range of spare parts - if you cannot see the item you need, call 01934 253600 or email [email protected].
| MPN | 95611025 |
|---|---|
| Product Code | EDDBAXISPARE32 |
| Compatible With: Product Code (SKU) | Heatrae Sadia Megaflo and Flexistor cylinders; Commercial Calorifiers direct, indirect and solar; Industrial Cylinders direct, indirect and solar |
| Part Origin | Genuine |
| Part or Accessory? | Part |
| Brand | Heatrae Sadia |
| Empty Weight (kG) | 0.2 |
| Full Weight (kG) | 0.2 |
Delivery Information -
Standard delivery for all orders over £150 ex-VAT are free of charge.
If we can speed this up, we will, but you can also select Express Delivery when you check out and get your purchase more quickly (usually the next working day, subject to a 1pm cut-off): there is an extra charge for this ranging from £5 to £29.99 depending on the products you are buying.
We partner with several of the best UK carriers (such as TNT, Royal Mail, DPD etc) depending on the type of product and the warehouse it is coming from, and also with some pallet companies for larger items. All of these operate during normal Monday – Friday working hours, and we expect all deliveries to arrive in 5 days. For more details checkout this page.
Gledhill Cylinders – Delivery Charge -
For all Gledhill Cylinders, a flat delivery charge of £33.00 (ex-VAT) applies, regardless of order value or delivery method. This will be added automatically at checkout.
Returns Information -
Having to return a product because it doesn’t fit, or is not what you wanted, is really annoying! To try and make sure this isn’t necessary we have lots of helpful advice on our site, and you should feel free to call our experts on the number above to check if you are in any doubt at all – we’re always happy to help.
But if you do, don’t worry, just contact us and we’ll get it sorted (note that for trade customers there may be a restocking fee). If you need it, we can usually arrange the carrier to pick it up.
For full details of our policy, check out the small print here.
Genuine Heatrae Sadia 95611025 Immersion Heater Gasket
The 95611025 is the genuine Heatrae Sadia sealing gasket that sits between an immersion heater flange and the boss on the cylinder or calorifier it screws into.
What it does
An immersion element enters the vessel through a threaded or bolted boss, and the gasket is the only thing making that joint watertight under working pressure. It is a consumable: once compressed and heat-cycled it takes a set, so it will not reseal reliably if it is reused after the element has been withdrawn.
When to fit one
- Every time an immersion heater or element is removed, for any reason
- When replacing a failed element - fit the new gasket with it, never the old one
- Where the existing joint is weeping or showing scale tracks around the flange
- After any inspection that involves breaking the element joint
Compatible models
Used across Heatrae Sadia Megaflo and Flexistor cylinders and on Commercial Calorifiers and Industrial Cylinders in direct, indirect and solar configurations. Immersion boss sizes vary across the Heatrae Sadia range, so confirm the gasket part number against the element you are fitting rather than the cylinder model alone.
Installation
Where the vessel is an unvented cylinder, work on it requires a G3 qualified operative under Building Regulations Part G. Drain to below the element before breaking the joint, fit the gasket dry unless the element instructions say otherwise, and tighten evenly to the manufacturer's figure.
Heatrae Sadia is part of Baxi Heating UK and this part is supplied through the Baxi genuine parts range, with a 1 year manufacturer warranty. Electrical Deals Direct stocks a wide range of spare parts - if you cannot see the item you need, call 01934 253600 or email [email protected].
| MPN | 95611025 |
|---|---|
| Product Code | EDDBAXISPARE32 |
| Compatible With: Product Code (SKU) | Heatrae Sadia Megaflo and Flexistor cylinders; Commercial Calorifiers direct, indirect and solar; Industrial Cylinders direct, indirect and solar |
| Part Origin | Genuine |
| Part or Accessory? | Part |
| Brand | Heatrae Sadia |
| Empty Weight (kG) | 0.2 |
| Full Weight (kG) | 0.2 |
Delivery Information -
Standard delivery for all orders over £150 ex-VAT are free of charge.
If we can speed this up, we will, but you can also select Express Delivery when you check out and get your purchase more quickly (usually the next working day, subject to a 1pm cut-off): there is an extra charge for this ranging from £5 to £29.99 depending on the products you are buying.
We partner with several of the best UK carriers (such as TNT, Royal Mail, DPD etc) depending on the type of product and the warehouse it is coming from, and also with some pallet companies for larger items. All of these operate during normal Monday – Friday working hours, and we expect all deliveries to arrive in 5 days. For more details checkout this page.
Gledhill Cylinders – Delivery Charge -
For all Gledhill Cylinders, a flat delivery charge of £33.00 (ex-VAT) applies, regardless of order value or delivery method. This will be added automatically at checkout.
Returns Information -
Having to return a product because it doesn’t fit, or is not what you wanted, is really annoying! To try and make sure this isn’t necessary we have lots of helpful advice on our site, and you should feel free to call our experts on the number above to check if you are in any doubt at all – we’re always happy to help.
But if you do, don’t worry, just contact us and we’ll get it sorted (note that for trade customers there may be a restocking fee). If you need it, we can usually arrange the carrier to pick it up.
For full details of our policy, check out the small print here.
Let us call you
Leave your details and a member of our team will call you back.
Thanks — we've got it!
One of the team will call you back shortly.
- Price:
- Actual Price: