Gledhill StainlessLite Plus Indirect 120L Unvented Cylinder PLUIN120
- SKU
- EDDGLEDHILL35
Gledhill StainlessLite Plus Indirect 120L Unvented Cylinder
The Gledhill StainlessLite Plus Indirect 120 litre is an unvented mains-pressure hot water cylinder in high-grade duplex stainless steel. Primary heating is by a gas or oil boiler through a high-efficiency corrugated stainless coil for rapid recovery, with a 3kW back-up immersion heater fitted for backup or when the boiler is not running. It delivers high-flow mains-pressure hot water to multiple outlets without a cold water storage tank.
Supplied as a complete Building Regulations G3 package: combination inlet group (pressure-reducing valve, strainer, check valve and expansion relief valve), a potable expansion vessel with wall bracket, the temperature and pressure relief valve, and a tundish. The temperature and pressure relief valve is factory set to 6 bar and 95°C. Backed by Gledhill's 25-year cylinder guarantee.
- 25-year cylinder guarantee
- Duplex stainless steel construction
- High-flow mains-pressure performance, no cold-water storage tank required
- ErP energy rating B
- Rapid boiler recovery through a high-efficiency corrugated coil
Specification
| Capacity | 120 litres |
|---|---|
| Primary heating | Gas or oil boiler via internal corrugated coil |
| Backup heating | a 3kW back-up immersion heater |
| Total immersion load | 3 kW |
| Boiler reheat time | 21 minutes |
| Dimensions (H x diameter) | 931 x 550 mm |
| ErP energy rating | B |
| Weight (empty / full) | 23 kg / 142 kg |
| Operating pressure | 3 bar |
| Expansion vessel | External (supplied) |
| Construction | Duplex stainless steel |
| Guarantee | 25 years (cylinder) |
What's included?
Combination inlet group (PRV, strainer, check valve, expansion relief valve), potable expansion vessel with wall bracket, temperature and pressure relief valve, and tundish.
This cylinder carries full WRAS and NSF/WRc approval for use with potable (drinking) water. The Gledhill StainlessLite Plus cylinders are primarily designed for 22mm domestic pipework.
G3 qualified installation is a legal requirement for unvented hot water storage under Building Regulations Part G.
| MPN | PLUIN120 |
|---|---|
| Product Code | EDDGLEDHILL35 |
| Height (mm) | 931 |
| Width (mm) | 550 |
| Depth (mm) | 550 |
| Capacity | 120 |
| Power (Watts) | 3000 |
| Recovery Time (mins) | 21 |
| Heater Type | Cylinder |
| Warranty (years) | 25 Cylinder / 2 Parts |
| Energy Performance Rating | B |
| Empty Weight (kG) | 23 |
| Full Weight (kG) | 142 |
| Brand | Gledhill |
Delivery Information -
Standard delivery for all orders over £150 ex-VAT are free of charge.
If we can speed this up, we will, but you can also select Express Delivery when you check out and get your purchase more quickly (usually the next working day, subject to a 1pm cut-off): there is an extra charge for this ranging from £5 to £29.99 depending on the products you are buying.
We partner with several of the best UK carriers (such as TNT, Royal Mail, DPD etc) depending on the type of product and the warehouse it is coming from, and also with some pallet companies for larger items. All of these operate during normal Monday – Friday working hours, and we expect all deliveries to arrive in 5 days. For more details checkout this page.
Gledhill Cylinders – Delivery Charge -
For all Gledhill Cylinders, a flat delivery charge of £33.00 (ex-VAT) applies, regardless of order value or delivery method. This will be added automatically at checkout.
Returns Information -
Having to return a product because it doesn’t fit, or is not what you wanted, is really annoying! To try and make sure this isn’t necessary we have lots of helpful advice on our site, and you should feel free to call our experts on the number above to check if you are in any doubt at all – we’re always happy to help.
But if you do, don’t worry, just contact us and we’ll get it sorted (note that for trade customers there may be a restocking fee). If you need it, we can usually arrange the carrier to pick it up.
For full details of our policy, check out the small print here.
Gledhill StainlessLite Plus Indirect 120L Unvented Cylinder
The Gledhill StainlessLite Plus Indirect 120 litre is an unvented mains-pressure hot water cylinder in high-grade duplex stainless steel. Primary heating is by a gas or oil boiler through a high-efficiency corrugated stainless coil for rapid recovery, with a 3kW back-up immersion heater fitted for backup or when the boiler is not running. It delivers high-flow mains-pressure hot water to multiple outlets without a cold water storage tank.
Supplied as a complete Building Regulations G3 package: combination inlet group (pressure-reducing valve, strainer, check valve and expansion relief valve), a potable expansion vessel with wall bracket, the temperature and pressure relief valve, and a tundish. The temperature and pressure relief valve is factory set to 6 bar and 95°C. Backed by Gledhill's 25-year cylinder guarantee.
- 25-year cylinder guarantee
- Duplex stainless steel construction
- High-flow mains-pressure performance, no cold-water storage tank required
- ErP energy rating B
- Rapid boiler recovery through a high-efficiency corrugated coil
Specification
| Capacity | 120 litres |
|---|---|
| Primary heating | Gas or oil boiler via internal corrugated coil |
| Backup heating | a 3kW back-up immersion heater |
| Total immersion load | 3 kW |
| Boiler reheat time | 21 minutes |
| Dimensions (H x diameter) | 931 x 550 mm |
| ErP energy rating | B |
| Weight (empty / full) | 23 kg / 142 kg |
| Operating pressure | 3 bar |
| Expansion vessel | External (supplied) |
| Construction | Duplex stainless steel |
| Guarantee | 25 years (cylinder) |
What's included?
Combination inlet group (PRV, strainer, check valve, expansion relief valve), potable expansion vessel with wall bracket, temperature and pressure relief valve, and tundish.
This cylinder carries full WRAS and NSF/WRc approval for use with potable (drinking) water. The Gledhill StainlessLite Plus cylinders are primarily designed for 22mm domestic pipework.
G3 qualified installation is a legal requirement for unvented hot water storage under Building Regulations Part G.
| MPN | PLUIN120 |
|---|---|
| Product Code | EDDGLEDHILL35 |
| Height (mm) | 931 |
| Width (mm) | 550 |
| Depth (mm) | 550 |
| Capacity | 120 |
| Power (Watts) | 3000 |
| Recovery Time (mins) | 21 |
| Heater Type | Cylinder |
| Warranty (years) | 25 Cylinder / 2 Parts |
| Energy Performance Rating | B |
| Empty Weight (kG) | 23 |
| Full Weight (kG) | 142 |
| Brand | Gledhill |
Delivery Information -
Standard delivery for all orders over £150 ex-VAT are free of charge.
If we can speed this up, we will, but you can also select Express Delivery when you check out and get your purchase more quickly (usually the next working day, subject to a 1pm cut-off): there is an extra charge for this ranging from £5 to £29.99 depending on the products you are buying.
We partner with several of the best UK carriers (such as TNT, Royal Mail, DPD etc) depending on the type of product and the warehouse it is coming from, and also with some pallet companies for larger items. All of these operate during normal Monday – Friday working hours, and we expect all deliveries to arrive in 5 days. For more details checkout this page.
Gledhill Cylinders – Delivery Charge -
For all Gledhill Cylinders, a flat delivery charge of £33.00 (ex-VAT) applies, regardless of order value or delivery method. This will be added automatically at checkout.
Returns Information -
Having to return a product because it doesn’t fit, or is not what you wanted, is really annoying! To try and make sure this isn’t necessary we have lots of helpful advice on our site, and you should feel free to call our experts on the number above to check if you are in any doubt at all – we’re always happy to help.
But if you do, don’t worry, just contact us and we’ll get it sorted (note that for trade customers there may be a restocking fee). If you need it, we can usually arrange the carrier to pick it up.
For full details of our policy, check out the small print here.
- Product Image
- Product Name
- Product SKU
- Product Price
- Product URL
- MPN
- Product Code
- Height (mm)
- Width (mm)
- Depth (mm)
- Power (Watts)
- Warranty (years)
- Capacity
- Recovery Time
- Heater Type
- Venting
- Energy Performance Rating
- Gledhill StainlessLite Plus Indirect 120L Unvented Cylinder PLUIN120
- EDDGLEDHILL35
- £516.32
- https://electricaldealsdirect.co.uk/gledhill-stainlesslite-plus-indirect-120-pluin120.html
- PLUIN120
- EDDGLEDHILL35
- 931
- 550
- 550
- 3000
- 25 Cylinder / 2 Parts
- 120
- 21
- Cylinder
- Unvented
- B
- Ariston Pro 1 ECO S 100L Unvented Direct Cylinder 3820021 | 4015330
- EDDARISTONPRO100
- £506.00
- https://electricaldealsdirect.co.uk/ariston-100-unvented-direct-100-litre-cylinder.html
- 4015330
- EDDARISTONPRO100
- 984
- 450
- 480
- 3000
- 5
- 100
- 72
- Cylinder
- Unvented
- B
- EHC Neptune 120L Direct Unvented Stainless Steel Cylinder
- EDDEHC87
- £620.00
- https://electricaldealsdirect.co.uk/ehc-neptune-120l-direct-unvented-stainless-steel-cylinder.html
- NDIR120L
- EDDEHC87
- 933
- 550
- 550
- 6000
- 25 Cylinder / 2 Parts
- 120
- 110
- Cylinder
- Unvented
- B
