Heatrae Sadia Main Power Printed Circuit Board 95615080 | Genuine Replacement Spare Part
- SKU
- EDDBAXISPARE15
Need something else?
Can’t find what you’re looking for? Click here to use our spare part finder.Genuine Heatrae Sadia 95615080 Main Power PCB
The 95615080 is the genuine main power printed circuit board for the Heatrae Sadia Amptec range of electric flow boilers, including the Amptec Underfloor units, and for the Electromax 9kW combination boiler and cylinder.
What it does
An electric flow boiler heats water as it passes through, using banks of heating elements switched in stages. The main power PCB is the board that carries and switches that load. It takes the demand signal from the control side, energises the element stages through its relays, and monitors the sensors that protect the appliance. It is distinct from any display or user-interface board.
Symptoms of a failed power PCB
- Boiler powers up but no elements energise, so there is no heat output
- Only some stages fire, giving reduced output that never reaches setpoint
- Audible relay chatter, or relays that stick closed and overheat the unit
- Visible scorching, swelling or burnt tracks around the relay or terminal area
- Fault indication pointing to the power side rather than the sensors
Compatible models
This board appears in the manufacturer's own parts lists for both the Amptec electric flow boiler and the Electromax 9kW, where it is the main power PCB assembly. Amptec boards changed across the life of the range and several related part numbers exist, so always check the number printed on the board you are replacing rather than working from the appliance model alone.
Installation
This is a mains-carrying component inside an electrical appliance. The supply must be isolated at the consumer unit and the board replaced by a qualified electrician. No gas or G3 qualification applies. Where a board has failed with visible heat damage, establish the cause before fitting a replacement.
Heatrae Sadia is part of Baxi Heating UK and this part is supplied through the Baxi genuine parts range, with a 1 year manufacturer warranty. Electrical Deals Direct stocks a wide range of spare parts - if you cannot see the item you need, call 01934 253600 or email [email protected].
| MPN | 95615080 |
|---|---|
| Product Code | EDDBAXISPARE15 |
| Compatible With: Product Code (SKU) | Heatrae Sadia Amptec electric flow boilers; Amptec Underfloor; Electromax 9kW |
| Part Origin | Genuine |
| Part or Accessory? | Part |
| Brand | Heatrae Sadia |
| Empty Weight (kG) | 0.2 |
| Full Weight (kG) | 0.2 |
Delivery Information -
Standard delivery for all orders over £150 ex-VAT are free of charge.
If we can speed this up, we will, but you can also select Express Delivery when you check out and get your purchase more quickly (usually the next working day, subject to a 1pm cut-off): there is an extra charge for this ranging from £5 to £29.99 depending on the products you are buying.
We partner with several of the best UK carriers (such as TNT, Royal Mail, DPD etc) depending on the type of product and the warehouse it is coming from, and also with some pallet companies for larger items. All of these operate during normal Monday – Friday working hours, and we expect all deliveries to arrive in 5 days. For more details checkout this page.
Gledhill Cylinders – Delivery Charge -
For all Gledhill Cylinders, a flat delivery charge of £33.00 (ex-VAT) applies, regardless of order value or delivery method. This will be added automatically at checkout.
Returns Information -
Having to return a product because it doesn’t fit, or is not what you wanted, is really annoying! To try and make sure this isn’t necessary we have lots of helpful advice on our site, and you should feel free to call our experts on the number above to check if you are in any doubt at all – we’re always happy to help.
But if you do, don’t worry, just contact us and we’ll get it sorted (note that for trade customers there may be a restocking fee). If you need it, we can usually arrange the carrier to pick it up.
For full details of our policy, check out the small print here.
Genuine Heatrae Sadia 95615080 Main Power PCB
The 95615080 is the genuine main power printed circuit board for the Heatrae Sadia Amptec range of electric flow boilers, including the Amptec Underfloor units, and for the Electromax 9kW combination boiler and cylinder.
What it does
An electric flow boiler heats water as it passes through, using banks of heating elements switched in stages. The main power PCB is the board that carries and switches that load. It takes the demand signal from the control side, energises the element stages through its relays, and monitors the sensors that protect the appliance. It is distinct from any display or user-interface board.
Symptoms of a failed power PCB
- Boiler powers up but no elements energise, so there is no heat output
- Only some stages fire, giving reduced output that never reaches setpoint
- Audible relay chatter, or relays that stick closed and overheat the unit
- Visible scorching, swelling or burnt tracks around the relay or terminal area
- Fault indication pointing to the power side rather than the sensors
Compatible models
This board appears in the manufacturer's own parts lists for both the Amptec electric flow boiler and the Electromax 9kW, where it is the main power PCB assembly. Amptec boards changed across the life of the range and several related part numbers exist, so always check the number printed on the board you are replacing rather than working from the appliance model alone.
Installation
This is a mains-carrying component inside an electrical appliance. The supply must be isolated at the consumer unit and the board replaced by a qualified electrician. No gas or G3 qualification applies. Where a board has failed with visible heat damage, establish the cause before fitting a replacement.
Heatrae Sadia is part of Baxi Heating UK and this part is supplied through the Baxi genuine parts range, with a 1 year manufacturer warranty. Electrical Deals Direct stocks a wide range of spare parts - if you cannot see the item you need, call 01934 253600 or email [email protected].
| MPN | 95615080 |
|---|---|
| Product Code | EDDBAXISPARE15 |
| Compatible With: Product Code (SKU) | Heatrae Sadia Amptec electric flow boilers; Amptec Underfloor; Electromax 9kW |
| Part Origin | Genuine |
| Part or Accessory? | Part |
| Brand | Heatrae Sadia |
| Empty Weight (kG) | 0.2 |
| Full Weight (kG) | 0.2 |
Delivery Information -
Standard delivery for all orders over £150 ex-VAT are free of charge.
If we can speed this up, we will, but you can also select Express Delivery when you check out and get your purchase more quickly (usually the next working day, subject to a 1pm cut-off): there is an extra charge for this ranging from £5 to £29.99 depending on the products you are buying.
We partner with several of the best UK carriers (such as TNT, Royal Mail, DPD etc) depending on the type of product and the warehouse it is coming from, and also with some pallet companies for larger items. All of these operate during normal Monday – Friday working hours, and we expect all deliveries to arrive in 5 days. For more details checkout this page.
Gledhill Cylinders – Delivery Charge -
For all Gledhill Cylinders, a flat delivery charge of £33.00 (ex-VAT) applies, regardless of order value or delivery method. This will be added automatically at checkout.
Returns Information -
Having to return a product because it doesn’t fit, or is not what you wanted, is really annoying! To try and make sure this isn’t necessary we have lots of helpful advice on our site, and you should feel free to call our experts on the number above to check if you are in any doubt at all – we’re always happy to help.
But if you do, don’t worry, just contact us and we’ll get it sorted (note that for trade customers there may be a restocking fee). If you need it, we can usually arrange the carrier to pick it up.
For full details of our policy, check out the small print here.
