Intergas 86514 Front Plate Seal | Genuine Replacement Spare Part
- SKU
- EDDINTERGAS03
Need something else?
Can’t find what you’re looking for? Click here to use our spare part finder.Intergas 86514 Front Plate Seal - Genuine Replacement Spare Part
The Intergas 86514 is a genuine small black Viton front plate seal, designed specifically for Intergas 24kW boilers. This is the current approved replacement seal, superseding the older red silicone version previously listed under part number 876467, and forms part of the same Intergas improvement programme that updated the seal specification across their entire boiler range.
Sitting in the recess on the rear face of the boiler's front plate, this seal forms a critical gas-tight barrier between the combustion chamber and the surrounding heat exchanger components. Its job is to ensure that combustion gases, including potentially dangerous carbon monoxide, stay fully contained within the heat exchanger and are expelled safely through the flue system. When this seal deteriorates or loses its elasticity, flue gases can escape into areas of the boiler where they should never be, creating a serious safety hazard and triggering persistent fault codes that leave the boiler locked out and the homeowner without heat or hot water.
Key Features:
Part Number: 86514 (also referenced as 086514)
Replaces: Old part number 876467 (red silicone seal)
Material: Black Viton - the current approved Intergas specification
Size: Small - suited to 24kW heat exchanger models
Position: Number 5 on the Intergas exploded parts diagram
Genuine Intergas spare part - manufactured to full OEM specification
Must be fitted by a Gas Safe registered engineer
Compatible Boilers:
Intergas Combi Compact HRE 24/18
Always verify compatibility against your boiler's exploded parts diagram before ordering. If you are servicing a model you are unsure about, contact the Intergas technical team on 01527 888000 for confirmation.
An Important Upgrade:
Following a safety review in 2017, Intergas upgraded all front plate seals across their boiler range from red silicone to black Viton. The black Viton material is significantly more resistant to the high temperatures and combustion gases generated inside the heat exchanger, and delivers a longer, more reliable service life. The 86514 is the only currently approved seal for 24kW models, and any red silicone seal found during a service visit must be replaced with this genuine black Viton version immediately.
Intergas Servicing Requirements:
Intergas specify that the black Viton front plate seal must be replaced every two years as a minimum, or sooner if any signs of wear, compression, or damage are found during inspection. This is a more frequent replacement interval than many other service items, reflecting how safety-critical this component is. Engineers servicing Intergas boilers should always carry the correct size seal for the models on their run to avoid unnecessary return visits.
Intergas provide a 1 year warranty on all spare parts. Electrical Deals Direct now sells a wide range of spare parts. If you cannot see the item you require on our website, please call 01934 253600 or email [email protected] for more information.
| MPN | 86514 |
|---|---|
| Product Code | EDDINTERGAS03 |
| Compatible With: Product Code (SKU) | Intergas 24kW heat exchanger boilers. Fits HRE Compact 18 OV/SB; Combi Compact HRE 24/18; ECO RF 24. |
| Part Origin | Genuine |
| Part or Accessory? | Part |
| Brand | Intergas |
| Full Weight (kG) | .2 |
Delivery Information -
Standard delivery for all orders over £150 ex-VAT are free of charge.
If we can speed this up, we will, but you can also select Express Delivery when you check out and get your purchase more quickly (usually the next working day, subject to a 1pm cut-off): there is an extra charge for this ranging from £5 to £29.99 depending on the products you are buying.
We partner with several of the best UK carriers (such as TNT, Royal Mail, DPD etc) depending on the type of product and the warehouse it is coming from, and also with some pallet companies for larger items. All of these operate during normal Monday – Friday working hours, and we expect all deliveries to arrive in 5 days. For more details checkout this page.
Gledhill Cylinders – Delivery Charge -
For all Gledhill Cylinders, a flat delivery charge of £33.00 (ex-VAT) applies, regardless of order value or delivery method. This will be added automatically at checkout.
Returns Information -
Having to return a product because it doesn’t fit, or is not what you wanted, is really annoying! To try and make sure this isn’t necessary we have lots of helpful advice on our site, and you should feel free to call our experts on the number above to check if you are in any doubt at all – we’re always happy to help.
But if you do, don’t worry, just contact us and we’ll get it sorted (note that for trade customers there may be a restocking fee). If you need it, we can usually arrange the carrier to pick it up.
For full details of our policy, check out the small print here.
Intergas 86514 Front Plate Seal - Genuine Replacement Spare Part
The Intergas 86514 is a genuine small black Viton front plate seal, designed specifically for Intergas 24kW boilers. This is the current approved replacement seal, superseding the older red silicone version previously listed under part number 876467, and forms part of the same Intergas improvement programme that updated the seal specification across their entire boiler range.
Sitting in the recess on the rear face of the boiler's front plate, this seal forms a critical gas-tight barrier between the combustion chamber and the surrounding heat exchanger components. Its job is to ensure that combustion gases, including potentially dangerous carbon monoxide, stay fully contained within the heat exchanger and are expelled safely through the flue system. When this seal deteriorates or loses its elasticity, flue gases can escape into areas of the boiler where they should never be, creating a serious safety hazard and triggering persistent fault codes that leave the boiler locked out and the homeowner without heat or hot water.
Key Features:
Part Number: 86514 (also referenced as 086514)
Replaces: Old part number 876467 (red silicone seal)
Material: Black Viton - the current approved Intergas specification
Size: Small - suited to 24kW heat exchanger models
Position: Number 5 on the Intergas exploded parts diagram
Genuine Intergas spare part - manufactured to full OEM specification
Must be fitted by a Gas Safe registered engineer
Compatible Boilers:
Intergas Combi Compact HRE 24/18
Always verify compatibility against your boiler's exploded parts diagram before ordering. If you are servicing a model you are unsure about, contact the Intergas technical team on 01527 888000 for confirmation.
An Important Upgrade:
Following a safety review in 2017, Intergas upgraded all front plate seals across their boiler range from red silicone to black Viton. The black Viton material is significantly more resistant to the high temperatures and combustion gases generated inside the heat exchanger, and delivers a longer, more reliable service life. The 86514 is the only currently approved seal for 24kW models, and any red silicone seal found during a service visit must be replaced with this genuine black Viton version immediately.
Intergas Servicing Requirements:
Intergas specify that the black Viton front plate seal must be replaced every two years as a minimum, or sooner if any signs of wear, compression, or damage are found during inspection. This is a more frequent replacement interval than many other service items, reflecting how safety-critical this component is. Engineers servicing Intergas boilers should always carry the correct size seal for the models on their run to avoid unnecessary return visits.
Intergas provide a 1 year warranty on all spare parts. Electrical Deals Direct now sells a wide range of spare parts. If you cannot see the item you require on our website, please call 01934 253600 or email [email protected] for more information.
| MPN | 86514 |
|---|---|
| Product Code | EDDINTERGAS03 |
| Compatible With: Product Code (SKU) | Intergas 24kW heat exchanger boilers. Fits HRE Compact 18 OV/SB; Combi Compact HRE 24/18; ECO RF 24. |
| Part Origin | Genuine |
| Part or Accessory? | Part |
| Brand | Intergas |
| Full Weight (kG) | .2 |
Delivery Information -
Standard delivery for all orders over £150 ex-VAT are free of charge.
If we can speed this up, we will, but you can also select Express Delivery when you check out and get your purchase more quickly (usually the next working day, subject to a 1pm cut-off): there is an extra charge for this ranging from £5 to £29.99 depending on the products you are buying.
We partner with several of the best UK carriers (such as TNT, Royal Mail, DPD etc) depending on the type of product and the warehouse it is coming from, and also with some pallet companies for larger items. All of these operate during normal Monday – Friday working hours, and we expect all deliveries to arrive in 5 days. For more details checkout this page.
Gledhill Cylinders – Delivery Charge -
For all Gledhill Cylinders, a flat delivery charge of £33.00 (ex-VAT) applies, regardless of order value or delivery method. This will be added automatically at checkout.
Returns Information -
Having to return a product because it doesn’t fit, or is not what you wanted, is really annoying! To try and make sure this isn’t necessary we have lots of helpful advice on our site, and you should feel free to call our experts on the number above to check if you are in any doubt at all – we’re always happy to help.
But if you do, don’t worry, just contact us and we’ll get it sorted (note that for trade customers there may be a restocking fee). If you need it, we can usually arrange the carrier to pick it up.
For full details of our policy, check out the small print here.
Let us call you
Leave your details and a member of our team will call you back.
Thanks — we've got it!
One of the team will call you back shortly.
- Price:
- Actual Price: