Alpha Printed Circuit Board 1.030267 PCB for Alpha Intec & Eco Gas Boilers
- SKU
- EDDALPHASPAREPART01
Our Expert's Opinion
"When you're getting random lockouts, fault codes that don't stack up with the sensors, or a complete no-power situation with everything else checking out fine, the board is usually where the diagnosis ends up."Alpha Printed Circuit Board 1.030267 PCB for Alpha Intec & Eco Gas Boilers
The Alpha 1.030267 is a genuine Alpha printed circuit board (PCB) designed as the central control unit for a wide range of Alpha Intec and Eco gas boilers. As the electronic brain of the appliance, the PCB continuously monitors and manages every function within the boiler, from ignition sequencing and burner modulation through to safety lockout responses, sensor signal processing, and fault code generation. When the PCB fails, the boiler will typically either cease to function entirely or begin exhibiting erratic behaviour that cannot be resolved by replacing any other component.
Compatible with an extensive list of Alpha Intec and Eco models, the 1.030267 is the correct replacement board for the Intec 24X, Intec 26C, Intec 28X, Intec 30C, Intec 30GS, Intec 34C, Intec 40GS, Intec 12S, Intec 18S, Intec 28S, and the Alpha Eco. This part supersedes the earlier Alpha part number 3.022790, which it replaces directly. Always confirm the correct part number against the boiler's data label and service documentation before fitting.
As a genuine Alpha OEM component, the 1.030267 PCB is pre-programmed with the correct operational routines for the supported boiler range, ensuring full compatibility with the appliance's burner, sensors, thermistors, and safety circuits straight out of the box. It connects to the boiler's wiring loom via the original harness connectors and requires no additional configuration on installation.
PCB replacement on Alpha Intec boilers must be carried out by a Gas Safe registered engineer. Incorrect installation or substitution of a non-genuine board can result in unsafe operation, warranty invalidation, and potential misdiagnosis of underlying faults — a thorough system check should always accompany PCB replacement to rule out secondary causes of board failure such as overvoltage, water ingress, or short circuits in the connected wiring.
Key Features:
MPN: 1.030267
Part Number: 1.030267
Replaces: 3.022790
Type: Printed Circuit Board (PCB)
Genuine Alpha OEM spare part
Compatible with Alpha Intec 24X, 26C, 28X, 30C, 30GS, 34C, 40GS, 12S, 18S, 28S and Alpha Eco
Pre-programmed for direct drop-in replacement
Installation by a Gas Safe registered engineer required
Alpha provide a 1 year warranty on all spare parts. Electrical Deals Direct now sells a wide range of spare parts. If you cannot see the item you require on our website, please call 01934 253600 or email [email protected] for more information.
| MPN | 1.030267 |
|---|---|
| Product Code | ALPHASPAREPART01 |
| Part Origin | Genuine |
| Part or Accessory? | Part |
| Brand | 0 |
Delivery Information -
Standard delivery for all orders over £150 ex-VAT are free of charge.
If we can speed this up, we will, but you can also select Express Delivery when you check out and get your purchase more quickly (usually the next working day, subject to a 1pm cut-off): there is an extra charge for this ranging from £5 to £29.99 depending on the products you are buying.
We partner with several of the best UK carriers (such as TNT, Royal Mail, DPD etc) depending on the type of product and the warehouse it is coming from, and also with some pallet companies for larger items. All of these operate during normal Monday – Friday working hours, and we expect all deliveries to arrive in 5 days. For more details checkout this page.
Gledhill Cylinders – Delivery Charge -
For all Gledhill Cylinders, a flat delivery charge of £33.00 (ex-VAT) applies, regardless of order value or delivery method. This will be added automatically at checkout.
Returns Information -
Having to return a product because it doesn’t fit, or is not what you wanted, is really annoying! To try and make sure this isn’t necessary we have lots of helpful advice on our site, and you should feel free to call our experts on the number above to check if you are in any doubt at all – we’re always happy to help.
But if you do, don’t worry, just contact us and we’ll get it sorted (note that for trade customers there may be a restocking fee). If you need it, we can usually arrange the carrier to pick it up.
For full details of our policy, check out the small print here.
Alpha Printed Circuit Board 1.030267 PCB for Alpha Intec & Eco Gas Boilers
The Alpha 1.030267 is a genuine Alpha printed circuit board (PCB) designed as the central control unit for a wide range of Alpha Intec and Eco gas boilers. As the electronic brain of the appliance, the PCB continuously monitors and manages every function within the boiler, from ignition sequencing and burner modulation through to safety lockout responses, sensor signal processing, and fault code generation. When the PCB fails, the boiler will typically either cease to function entirely or begin exhibiting erratic behaviour that cannot be resolved by replacing any other component.
Compatible with an extensive list of Alpha Intec and Eco models, the 1.030267 is the correct replacement board for the Intec 24X, Intec 26C, Intec 28X, Intec 30C, Intec 30GS, Intec 34C, Intec 40GS, Intec 12S, Intec 18S, Intec 28S, and the Alpha Eco. This part supersedes the earlier Alpha part number 3.022790, which it replaces directly. Always confirm the correct part number against the boiler's data label and service documentation before fitting.
As a genuine Alpha OEM component, the 1.030267 PCB is pre-programmed with the correct operational routines for the supported boiler range, ensuring full compatibility with the appliance's burner, sensors, thermistors, and safety circuits straight out of the box. It connects to the boiler's wiring loom via the original harness connectors and requires no additional configuration on installation.
PCB replacement on Alpha Intec boilers must be carried out by a Gas Safe registered engineer. Incorrect installation or substitution of a non-genuine board can result in unsafe operation, warranty invalidation, and potential misdiagnosis of underlying faults — a thorough system check should always accompany PCB replacement to rule out secondary causes of board failure such as overvoltage, water ingress, or short circuits in the connected wiring.
Key Features:
MPN: 1.030267
Part Number: 1.030267
Replaces: 3.022790
Type: Printed Circuit Board (PCB)
Genuine Alpha OEM spare part
Compatible with Alpha Intec 24X, 26C, 28X, 30C, 30GS, 34C, 40GS, 12S, 18S, 28S and Alpha Eco
Pre-programmed for direct drop-in replacement
Installation by a Gas Safe registered engineer required
Alpha provide a 1 year warranty on all spare parts. Electrical Deals Direct now sells a wide range of spare parts. If you cannot see the item you require on our website, please call 01934 253600 or email [email protected] for more information.
| MPN | 1.030267 |
|---|---|
| Product Code | ALPHASPAREPART01 |
| Part Origin | Genuine |
| Part or Accessory? | Part |
| Brand | 0 |
Delivery Information -
Standard delivery for all orders over £150 ex-VAT are free of charge.
If we can speed this up, we will, but you can also select Express Delivery when you check out and get your purchase more quickly (usually the next working day, subject to a 1pm cut-off): there is an extra charge for this ranging from £5 to £29.99 depending on the products you are buying.
We partner with several of the best UK carriers (such as TNT, Royal Mail, DPD etc) depending on the type of product and the warehouse it is coming from, and also with some pallet companies for larger items. All of these operate during normal Monday – Friday working hours, and we expect all deliveries to arrive in 5 days. For more details checkout this page.
Gledhill Cylinders – Delivery Charge -
For all Gledhill Cylinders, a flat delivery charge of £33.00 (ex-VAT) applies, regardless of order value or delivery method. This will be added automatically at checkout.
Returns Information -
Having to return a product because it doesn’t fit, or is not what you wanted, is really annoying! To try and make sure this isn’t necessary we have lots of helpful advice on our site, and you should feel free to call our experts on the number above to check if you are in any doubt at all – we’re always happy to help.
But if you do, don’t worry, just contact us and we’ll get it sorted (note that for trade customers there may be a restocking fee). If you need it, we can usually arrange the carrier to pick it up.
For full details of our policy, check out the small print here.
- Price:
- Actual Price:
Are you sure you would like to remove this item from the shopping cart?
This item is a part of the approved quote. Removing it will remove all quote items from the cart.