Zip Aquapoint IV AP4/50S Unvented Water Heater AP450S 2kW



- SKU
- EDDZIPW12
Our Expert's Opinion
"The Aquapoint range is highly rated by the trade."Zip Aquapoint IV AP4/50S 50 Litre Unvented Water Heater
The Zip Aquapoint IV is a wall-mounted unvented water heater. It connects straight to the cold mains and can serve one or more hot taps at mains pressure. This 50 litre model (AP450S) is heated by a 2kW element and runs from a 13 amp supply, for homes and commercial sites alike.
SmartEco control
The electronic controller sets the water anywhere from 10°C to 75°C, with an eco setting of about 57°C that Zip recommends for the lowest heat loss and limescale. In SmartEco mode it records your hot water use for 7 days, then heats around that pattern to use less electricity. It also has an anti-legionella function and a 10°C frost protection setting.
Built to last
The inner tank is glass-lined steel tested to 13 bar, protected against corrosion by a magnesium anode and insulated with high-performance polyurethane foam. A manually resettable safety cut-out switches off the element if a fault occurs.
Specification
| Zip product code | AP450S |
|---|---|
| Nominal capacity | 50 litres |
| Storage volume | 49.1 litres |
| Mixed water at 40°C (V40) | 68 litres |
| Power | 2.0kW at 230V |
| Electrical supply | 13 amp |
| Heat up, 10°C to 65°C | 1 hour 38 minutes |
| Temperature range | 10°C to 75°C |
| Dimensions (W x D x H) | 420 x 445 x 690mm |
| Weight empty / full | 24kg / 74kg |
| Water connections | 1/2in BSP |
| Minimum water pressure | 1 bar |
| Maximum working pressure | 6 bar |
| Mounting | Wall, vertical only |
| IP rating | IP24 |
| ErP energy class | B (load profile M) |
| Approvals | WRAS, CE, UKCA |
| Warranty | 1 year on-site parts and labour |
What's included?
Zip's AQ105 install kit: a cold inlet assembly (pressure reducing valve with integral line strainer, expansion relief valve with check valve, expansion vessel take-off and balanced cold take-off), an expansion vessel with wall fixing bracket, a wall locating bracket and a tundish.
Installation
This is an unvented water heater, so it must be installed by a G3 qualified installer (Building Regulations Part G). Zip advises regular servicing, including a check of the anode, to keep the heater at its best.
Compare the full Zip Aquapoint IV range.
| MPN | AP450S |
|---|---|
| Product Code | EDDZIPW12 |
| Height (mm) | 690 |
| Width (mm) | 420 |
| Depth (mm) | 445 |
| Capacity | 50 |
| Power (Watts) | 2000 |
| Recovery Time (mins) | 98 |
| Heater Type | Small/POU Water Heater |
| Warranty (years) | 1 |
| Energy Performance Rating | B |
| Empty Weight (kG) | 24 |
| Full Weight (kG) | 74 |
| Brand | Zip |
Delivery Information -
Standard delivery for all orders over £150 ex-VAT are free of charge.
If we can speed this up, we will, but you can also select Express Delivery when you check out and get your purchase more quickly (usually the next working day, subject to a 1pm cut-off): there is an extra charge for this ranging from £5 to £29.99 depending on the products you are buying.
We partner with several of the best UK carriers (such as TNT, Royal Mail, DPD etc) depending on the type of product and the warehouse it is coming from, and also with some pallet companies for larger items. All of these operate during normal Monday – Friday working hours, and we expect all deliveries to arrive in 5 days. For more details checkout this page.
Gledhill Cylinders – Delivery Charge -
For all Gledhill Cylinders, a flat delivery charge of £33.00 (ex-VAT) applies, regardless of order value or delivery method. This will be added automatically at checkout.
Returns Information -
Having to return a product because it doesn’t fit, or is not what you wanted, is really annoying! To try and make sure this isn’t necessary we have lots of helpful advice on our site, and you should feel free to call our experts on the number above to check if you are in any doubt at all – we’re always happy to help.
But if you do, don’t worry, just contact us and we’ll get it sorted (note that for trade customers there may be a restocking fee). If you need it, we can usually arrange the carrier to pick it up.
For full details of our policy, check out the small print here.
Zip Aquapoint IV AP4/50S 50 Litre Unvented Water Heater
The Zip Aquapoint IV is a wall-mounted unvented water heater. It connects straight to the cold mains and can serve one or more hot taps at mains pressure. This 50 litre model (AP450S) is heated by a 2kW element and runs from a 13 amp supply, for homes and commercial sites alike.
SmartEco control
The electronic controller sets the water anywhere from 10°C to 75°C, with an eco setting of about 57°C that Zip recommends for the lowest heat loss and limescale. In SmartEco mode it records your hot water use for 7 days, then heats around that pattern to use less electricity. It also has an anti-legionella function and a 10°C frost protection setting.
Built to last
The inner tank is glass-lined steel tested to 13 bar, protected against corrosion by a magnesium anode and insulated with high-performance polyurethane foam. A manually resettable safety cut-out switches off the element if a fault occurs.
Specification
| Zip product code | AP450S |
|---|---|
| Nominal capacity | 50 litres |
| Storage volume | 49.1 litres |
| Mixed water at 40°C (V40) | 68 litres |
| Power | 2.0kW at 230V |
| Electrical supply | 13 amp |
| Heat up, 10°C to 65°C | 1 hour 38 minutes |
| Temperature range | 10°C to 75°C |
| Dimensions (W x D x H) | 420 x 445 x 690mm |
| Weight empty / full | 24kg / 74kg |
| Water connections | 1/2in BSP |
| Minimum water pressure | 1 bar |
| Maximum working pressure | 6 bar |
| Mounting | Wall, vertical only |
| IP rating | IP24 |
| ErP energy class | B (load profile M) |
| Approvals | WRAS, CE, UKCA |
| Warranty | 1 year on-site parts and labour |
What's included?
Zip's AQ105 install kit: a cold inlet assembly (pressure reducing valve with integral line strainer, expansion relief valve with check valve, expansion vessel take-off and balanced cold take-off), an expansion vessel with wall fixing bracket, a wall locating bracket and a tundish.
Installation
This is an unvented water heater, so it must be installed by a G3 qualified installer (Building Regulations Part G). Zip advises regular servicing, including a check of the anode, to keep the heater at its best.
Compare the full Zip Aquapoint IV range.
| MPN | AP450S |
|---|---|
| Product Code | EDDZIPW12 |
| Height (mm) | 690 |
| Width (mm) | 420 |
| Depth (mm) | 445 |
| Capacity | 50 |
| Power (Watts) | 2000 |
| Recovery Time (mins) | 98 |
| Heater Type | Small/POU Water Heater |
| Warranty (years) | 1 |
| Energy Performance Rating | B |
| Empty Weight (kG) | 24 |
| Full Weight (kG) | 74 |
| Brand | Zip |
Delivery Information -
Standard delivery for all orders over £150 ex-VAT are free of charge.
If we can speed this up, we will, but you can also select Express Delivery when you check out and get your purchase more quickly (usually the next working day, subject to a 1pm cut-off): there is an extra charge for this ranging from £5 to £29.99 depending on the products you are buying.
We partner with several of the best UK carriers (such as TNT, Royal Mail, DPD etc) depending on the type of product and the warehouse it is coming from, and also with some pallet companies for larger items. All of these operate during normal Monday – Friday working hours, and we expect all deliveries to arrive in 5 days. For more details checkout this page.
Gledhill Cylinders – Delivery Charge -
For all Gledhill Cylinders, a flat delivery charge of £33.00 (ex-VAT) applies, regardless of order value or delivery method. This will be added automatically at checkout.
Returns Information -
Having to return a product because it doesn’t fit, or is not what you wanted, is really annoying! To try and make sure this isn’t necessary we have lots of helpful advice on our site, and you should feel free to call our experts on the number above to check if you are in any doubt at all – we’re always happy to help.
But if you do, don’t worry, just contact us and we’ll get it sorted (note that for trade customers there may be a restocking fee). If you need it, we can usually arrange the carrier to pick it up.
For full details of our policy, check out the small print here.
- Product Image
- Product Name
- Product SKU
- Product Price
- Product URL
- MPN
- Product Code
- Height (mm)
- Width (mm)
- Depth (mm)
- Power (Watts)
- Warranty (years)
- Capacity
- Recovery Time
- Heater Type
- Venting
- Energy Performance Rating

- Zip Aquapoint IV AP4/50S Unvented Water Heater AP450S 2kW
- EDDZIPW12
- £584.00
- https://electricaldealsdirect.co.uk/zip-aquapoint-iiii-ap4-50-unvented-water-heater.html
- AP450S
- EDDZIPW12
- 690
- 420
- 445
- 2000
- 1
- 50
- 98
- Small/POU Water Heater
- Unvented
- B

- Heatrae Sadia Multipoint 10 Litre 3 kW Unvented Water Heater 95050143
- EDDSADIA6
- £622.00
- https://electricaldealsdirect.co.uk/heatrae-sadia-multipoint-10-litre-3-kw-unvented-water-heater.html
- 95050143
- EDDSADIA6
- 572
- 267
- 252
- 3000
- 2
- 10
- -
- Small/POU Water Heater
- Unvented
- A

- Santon Aquaheat 15 Litre AH15 Unvented Water Heater 94050003
- EDDSANTON25
- £256.00
- https://electricaldealsdirect.co.uk/santon-aquaheat-15-litre-ah1522-unvented-water-heater.html
- 94050003
- EDDSANTON25
- 417
- 330
- 330
- 3000
- 2
- 15
- -
- Small/POU Water Heater
- Unvented
- B












